Anet
Trending

Anet 3D Printers BOM Part List and Sourcing Guide

26/08/2020
0 1,149 3 minutes read
Anet A8

Anet 3D printers are known as cost-effective performance, simple to assemble, which is suitable for DIY customers. In the market Anet A6 and Anet A8 are most popular models. Here we list the major replacement parts and where to buy links.

Please note that many links that I list here will likely be affiliate links from Aliexpress, Amazon, Gearbest, etc.

Mainboard

For Models: Anet A8

v1.7 board 

    

v1.5 board 

    

v1.0 board (older version, with bootlooder)

           

For Models: Anet A6

v1.7 board

v1.5 board 

    

v1.0 board

LCD

Code: 1700200011

For Models: Anet A8

           

For Models: Anet A6, E10

        

Nema 17 Stepper Motors

Code: 1700200008, 1700200009, 1700200010

0.9A / 1.8 degree

For Models: Anet A6, A8, E12

           

Nema 17 Stepper Motor Cable

For Models: Anet A6, A8

  • Motor side 6 pin JST, board side 4 pin HX2.54
  • Length: 100cm (B Type)

        

For Models: Anet A6, A8

Needed when upgrading Ramps 1.4 or so.
(For Ramps you may need to swap middle cables on dupont side)

  • 6 pin JST connector on stepper side
  • 4 pin dupont connector of the board side
  • Length: 100cm

        

Power Supply (PSU)

Code: 1200100002

For Models: Anet A6, A8

            

We suggest getting min 30A PSU

Flexible Helical Coupling

For Models: Anet A6 & A8

Where to buy: (Select 5x8mm)

              

Motion Ball Bearing (Metal)

For Models: Anet A6 & A8

              

LM8UU Ball Bearings

For Models: Anet A6 & A8

       

    

Timing Pulley – 16 Teeth

For Models: Anet A6, A8, E10

              

GT2 Belt

Code: 1700300001

For Models: Anet A6, A8

                       

  • Aliexpress: 2M-6MM-2GT
  • Amazon: 1st link std, 2nd link premium quality

Full Extruder Kit

Code: 1700100016

For Models: Anet A6, A8

                

Thermistor (NTC 3950 100K)

For Models: Anet A6, A8

               

Heating Tube (12V)

For Models: Anet A2, A3, A6, A8

           

Nozzle Only

For Models: Anet A2, A6, A8

     

   

Nozzle Extruder Throat 

For Models: Anet A2, A8 (30mm tube)

       

For Models: Anet A6 (40mm tube)

     

Heater Block Kit

For Models: Anet A2, A8 (30mm tube)

           

For Models: Anet A6 (40mm tube)

          

Extruder Spring 

For Models: Anet A6, A8

               

For hotbed

Hotbed

For Models:

  • Anet A6, A8: 220×220 mm
  • Anet E10: 220×270 mm
  • Anet E12: 300×300 mm

           

Hotbed Cable Only

Code: 1700200027

For Models: Anet A6, A8

           

Fan 40*10

Code: 1700200003

For Models: Anet A6 & A8  (Select 12V)

           

5015 Air Blower Fan 

Code: 1700200005   For Models: Anet A6 & A8

Regular (0.15-0.18A)

         

Strong (028A-0.35A)

    

 X,Y,Z Limit Switchers

Code: 1700200013, 1700200014

For Models: Anet A6, A8

             

Switch + cable

Lead Screw Rods & Threaded Rods / T8

Code: 1700100015 (345mm M8)

For Models: A8

       

Code: 1700100015 (400mm M8)

For Models: A8

       

 

Code: 1700100015 (150mm M8) Filament Support Screw

For Models: A8

       

 

Guide Rods

Code: 1700100014 (380mm)

For Models: Anet A8

      

Code: 1700100014 (436mm)

436mm Rods are not available to replace. Best option to get 440mm.

For Models: Anet A8

     

 

The Left Z Axis nut Support

Code: 1700300005

For Models: A8

Extruder Carriage Full Metal / LM8UU & IGUS Options

For Models: Anet A8, A6

Y-Carriage Upgrade Alloy Plate

For Models: (Only Plate)

  • Anet A6, A8

     

For Models: (Kit)

  • Anet A6, A8

Anet A8 Full Frame Kit

For Models: A8

Optional Upgrades and Accessories

Anet A8 Power Supply Cover/Protector

For Models: A8

Anet A8 Aluminum Y-Belt Tensioner Kit

For Models: A8

ENERGETIC Spring Steel Sheet / PEI Sheet

For Models: A8, A6, E12

Bed Leveling Sensors

For Models: For many 3D Printers

BL Touch / Genuine Sensor

    

For Models: For many 3D Printers

3D Touch / Cloned Sensor – Updated new version

   

 

For Models: Anet A8

Anet A8 Complete Auto Bed Leveling Kit Glass Compatible 

Nozzle Cleaner

For Models: All 3D printers (nozzles)

             

Mosfets (Strongly recommended for safety)

For Models: General

                 

SD Card Extension 

For Models: All

      

Genuine Borosilicate Glass Build Plate

For Models:

  • Anet A6, A8  220x220x3mm
  • Anet E12: 300x300x3 mm

           

Stepper Motors Parallel Connection Cable

For Models: May needed on Mainboard upgrades. Works on Anet, Tronxy, Creality and Many More

  • Use existing stepper cables without modification
  • Simply plug this into a single motherboard stepper connection and plug your stepper cables into this.

Stepper Motora Parallel Connection Board

For Models: May needed on Mainboard upgrades. Works on Anet, Tronxy, Creality and Many More

  • This module apply for stepper motors.One driver drives 2 motors.

   

Nema 17 Stepper Motor – HX2.54 & Dupont Cable

For Models: All

  • Motor side 6 pin HX2.54, board side 4 pin dupont
  • Length: 100cm

       

200/300mm Foil Self-adhesive Heat Insulation

For Models: 200×200 and 300×300 bed size

  • 200/300mm Foil Self-adhesive Heat Insulation
  • 10mm Thickness 3D Printer Heating Bed Sticker

Tags
26/08/2020
0 1,149 3 minutes read
Show More

Related Articles

Klipper Example Config for SKR v1.3

21/07/2020
Anet A8

Anet A8 Installation Guide

27/07/2020
3D Touch

3D Touch Sensor Setup on Anet A8 with Marlin Firmware

21/07/2020
Anet A8 Güncelleme

Must Have Anet A8 Upgrades and Mods

25/07/2020
Back to top button
Close

Adblock Detected

Lütfen Add Blocker uygulamanızı bu site için devre dışı bırakın. Rahatsız edici bir reklam uygulamamız yoktur. Please turn the Add Blocker off as you may see there is no annoying ads in the blog.